Rated operating voltage
Refers to the voltage required by the coil when the relay is working normally. Depending on the type of relay, it can be either an AC voltage or a DC voltage.
2. DC resistance
Refers to the DC resistance of the coil in the relay, which can be measured by a universal meter.
3. Pull-in current
It refers to the minimum current that the relay can generate the pull-in action. In normal use, the given current must be slightly larger than the pull-in current so that the relay can operate stably. For the working voltage applied to the coil, generally do not exceed 1.5 times the rated working voltage, otherwise a large current will be generated and the coil will be burnt.
4. Release current
It is the maximum current that the relay generates to release. When the current in the state of the relay is reduced to a certain level, the relay will return to the unenergized release state. The current at this time is much smaller than the pull-in current.
5. Contact switching voltage and current
Refers to the voltage and current that the relay is allowed to load. It determines the size of the relay to control the voltage and current, and can not exceed this value when used, otherwise it will easily damage the contacts of the miniature relay.
Character: -80A contact switching capability.-Only impulse excitation needed, both for single and d...View More
Character: -120A contact switching capability.-Only impulse excitation needed, both for single and ...View More
Character: -25A contacts switching capability.-Only impulse excitation needed, both for single and ...View More
Character: -120A three sets of contacts switching capability.-Only impulse excitation needed, both ...View More