How EBW Shunt Resistor works

Update:21-11-2022
EBW Shunt resistor is a common element in any circuit and can be used to protect a circuit from over-voltage or over-current conditions. It is recommended to use a derating factor of at least 66 percent for continuous operation.EBW shunt resistors are used to protect a circuit from too high a voltage. When the voltage is too high, it causes a short circuit, which may lead to a fuse or circuit breaker blowing.EBW shunt resistors come in different varieties. One common type is an insulated metal alloy shunt resistor. These resistors are often used in power conditioning and motor control circuits.

They are also used in current sensing in hybrids and electric vehicles.These resistors are normally soldered to a copper terminal. They have an insulation stripped off before soldering. These resistors are generally more expensive than other types of resistors. However, they have the advantage of low noise. They are also vibration proof.These shunt resistors are used in current measuring devices. They have high accuracy, low noise, and low power dissipation. EBW series resistors from TT Electronics range from 25 to 500 mO. They have TCR below 200 ppm/degC.

They also include provisions for Kelvin connections.EBW shunt resistors are part of the battery management system in a car or other type of vehicle. These resistors minimize the voltage drop that occurs in the battery and ensure proper performance of the battery. They also help in avoiding high-frequency noise that can occur in the battery.The current shunt resistor is a device that measures electrical current and is also used for DC measurements. The shunt resistor is placed between the positive terminal of the power supply and the ground terminal of the circuit.

The resistor is normally a high-precision manganin resistor. The temperature coefficient of the resistor is another parameter that influences the accuracy of the shunt resistor. If the temperature rises above 140degC, the resistive element will no longer function as intended.The shunt resistor is also used to detect short conditions in the circuit. In this case, the current flows through the shunt resistor and is redirected to ground. However, leakage currents bypassing the shunt may not be detected.
GRT508HC Electric Prepaid Meter Single Phase 100A Latching Relay

GRT508HC Electric Prepaid Meter Single Phase 100A Latching Relay

Character: -100A contact switching capability.-Only impulse excitation needed, both for single and ...

View More
Hot Sale GRT508H-120A Single-phase relay

Hot Sale GRT508H-120A Single-phase relay

Character: -120A contact switching capability.-Only impulse excitation needed, both for single and ...

View More
GRT508B RoHS compliant 90A Single-phase Relay

GRT508B RoHS compliant 90A Single-phase Relay

Character: -90A contact switching capability.-Only impulse excitation needed, both for single and d...

View More
GRT508A Custom 60A Latching Single-phase Relays

GRT508A Custom 60A Latching Single-phase Relays

Character: -60A contact switching capability.-Only impulse excitation needed, both for single and d...

View More
Custom RoHS & UC3 Certification 120A Three Phase Latching Relays

Custom RoHS & UC3 Certification 120A Three Phase Latching Relays

Character: -120A three sets of contacts switching capability.-Only impulse excitation needed, both ...

View More